MiSTer FPGA Cyclone V SoC 128mb SDRAM Console with Acrylic Enclosure

Discover the MiSTer FPGA console with Cyclone V SoC, a platform designed to recreate a wide range of classic systems through FPGA hardware, from arcade machines to retro consoles and home computers.

Unlike purely software-based emulation, MiSTer uses FPGA technology to implement the behaviour of the original hardware through community-developed cores. The result is an experience aimed squarely at retrogaming enthusiasts, hardware preservation and projects built around classic systems.

This version comes fully assembled in a translucent acrylic case with black top and bottom panels, which leaves the internal electronics partly visible and gives the unit a compact, technical finish.

It features 128 MB of SDRAM, split across two 64 MB modules, and also includes a 32GB TF card with the MiSTer system preinstalled, providing a ready base to start setting up cores and compatible content.

MiSTer FPGA platform

MiSTer is an open FPGA-based project that implements different classic platforms through dedicated cores. Built on the Cyclone V SoC architecture, a single unit can run a large number of systems developed for the MiSTer ecosystem.

The project keeps evolving thanks to a large community of developers who maintain existing cores and create new cores, features and updates.

128 MB SDRAM

The unit comes with two 64 MB SDRAM modules installed, for a total of 128 MB of SDRAM. This is the low-latency memory used by many MiSTer cores, particularly for arcade systems and consoles, and it is required for a large part of the platform's library.

As it comes pre-fitted, there is no need to buy or install the memory separately.

RGB output with Sega Saturn connector

The console features an RGB video output with a Sega Saturn-style connector, allowing the analogue signal to be sent to CRT televisions, monitors and other equipment with an RGB SCART input.

It is compatible with our Sega Saturn Express Pro RGB SCART cable, which is sold separately. Using the analogue output may require adjusting the MiSTer system's video settings.

32GB TF card included

The console includes a 32GB TF card with the MiSTer system preinstalled, making initial setup easier.

The supplied card contains the MiSTer system needed to start configuring the platform, but does not include any games or ROMs.

Translucent acrylic case

The unit is housed in a case made of translucent acrylic panels with black top and bottom plates. The design protects the electronics while keeping the boards and internal components partly visible.

The exterior also provides direct access to the various connections and controls, making it easy to use on a desk, in retrogaming setups or in dedicated builds.

Package contents

• 1 x MiSTer FPGA console with Cyclone V SoC
• 1 x Translucent acrylic case with black panels
• 2 x 64 MB SDRAM module (installed)
• 1 x 32GB TF card with MiSTer system preinstalled
• 1 x 5V DC power adapter

IMPORTANT

Games and ROMs are not included. The supplied TF card contains only the MiSTer system required for the platform. Users must add the files needed for the cores they wish to use themselves.

The Sega Saturn RGB SCART cable is not included and must be purchased separately. Controllers, additional cables, displays and other accessories that may appear in the product photos are not included unless expressly listed in the package contents.

Features

• MiSTer FPGA platform
• Based on Cyclone V SoC
• 128 MB SDRAM (2 x 64 MB modules)
• RGB video output with Sega Saturn connector
• Compatible with the Sega Saturn Express Pro RGB SCART cable (sold separately)
• FPGA technology for implementing classic systems
• Compatible with cores developed for the MiSTer ecosystem
• Translucent acrylic case
• Black top and bottom panels
• Internal electronics partly visible
• 32GB TF card included
• MiSTer system preinstalled
• No games or ROMs included
• 5V DC power adapter included
• Designed for retrogaming and FPGA projects