"Extra Ball" Iluminated LED Pinball Button

This beautiful "Extra Ball" Green illuminated LED Translucent Arcade Button is used to get an extra ball in our Pinball games. Most Pinball games offer extra balls when a certain score is reached, this is when we will make use of this button. This button is intended to be used in a mechanical Pinball table or in a Virtual Pinball.

The "Extra Ball" Iluminated LED Translucent Green Pinball Button includes the microswitch and the LED that allows you to connect up to 12V, although we recommend that you power it with 5V. The inside green bright LEDs will illuminate the credit text giving a decorative, elegant, and also practical touch to your Arcade project.

With a 24mm diameter and an approximate length of 35mm, the pushbutton can be installed on both metal and wooden panels quickly and easily thanks to the Nut Thread Washer system. This push button can be installed in holes ranging from 24mm to 28mm in diameter.

The LED is compatible with both 5V and 12V. In case the LED stops working, you can easily replace it. At our store you can find loose LED lamps that will serve as replacements.

In order to light up this Pinball button, you will need a 5V or 12V power source. We recommend that you either directly get it from the Arcade Machine power supply or from one of the 5V pins on the Xin Mo encoder, or the specific Zero Delay LED encoders to light up the LEDs. These Zero Delays are available for 1 or 2 players which are also available at our store.

Mounting Information

To install the LED Arcade push button, you'll need 4.8mm wiring as that is the width of the button action terminals and 6.3mm LED wiring as that is the width of the LED fastons. If you purchase one our interfaces, be sure to select the one with 6.3mm wide terminals wire. You can also purchase extra 6.3mm cables for the Zero Delay LED or the Xin Mo from the links below: Zero Delay / Xin Mo.

Features

• Microswitch and LEDs included
• Elegant and practical
• Blee brand 4.8mm Microswitch
• For 24mm-28mm diameter holes
• Length 35mm
• Metal / wood panels
• 12V / 5V voltage
• Easy installation