Undoubtedly one of the most important aspects to take into account when building a Pinball, Arcade / Bartop Machine is the music. Those great 8 bit and 16 bit tunes from our favorite games need to be played at full volume. Street Fighter II, Castlevania, Batman The Game, Super Mario Bros, 1942, Out-Run and many other games whose tunes we will never forget.
At Arcade Express we think that the most effective way of getting good quality sound on our respective arcades is by placing a pair of individual speakers and a separate audio amplifier to allow us complete control over our equipment. This will allow you more freedom to install the audio in your equipment than if you buy a standard speaker system which, in all likelihood, you will have to disassemble from the speaker box, fiddle with wires and ultimately complicating the assembly process from our view.
These amazing 2" inch speakers are made by AudioPro, a brand that manufactures for Suzo Happ, and are intended to be used in small projects. Projects such as mini-bartops, mini-pinballs and similar.
The 2" 4W 8 ohm Suzo Happ Speakers, despite their small sizehave a great sound quality, with 4 watts and 8 ohms reaching a maximum of 5 watts of power. This we think, is enough sound power to listen to the music and sound effects of your Arcade or Pinball machine mini-project to a more than acceptablevolume!. These superb speakers have a frequency response of between 220 - 2000HZ SPL OUTPUT -10Db.
The 2" Suzo Happ Speakers have 2 connectors of 2.8mm and 6.3mm that can be soldered directly to some audio cables, although we recommend you to buy the ones we sell at Arcade Express as they are of very good quality and come with already soldered connectors. You can find the cables in the following LINK. We also recommend, in case you want to install a speaker cover grill for these speakers to use the 95mm diameter ones, which can also be purchased through the following link: 95mm